background image

E7

GP2000  Series VM Unit User Manual

UL/c-UL (CSA) APPLICATION

The GP2000-VM41 is a UL/c-UL (CSA) listed product. (UL file No.E182139)

This unit conforms as a product to the following standards:

„

„

„

„

„

  UL508   

Industrial Control Equipment

„

„

„

„

„

  UL1604

 Electrical Equipment for use in Class 1 & 2 - Division 2,

or Class 3 Hazardous Locations.

„

„

„

„

„

  CAN/CSA-C22.2, Nos 142, and 213-M1987

Standard for Safety of Information Technology Equipment, including Electrical Busi-
ness Equipment

GP2000-VM41

 (UL Registration Model: 2980020-01)

<Cautions>

• The VM must be used as a built-in component of a GP unit.

• If this unit is installed so as to cool itself naturally, be sure to attach the VM to a

GP unit that is installed in a vertical panel. Also, be sure that the GP unit is
mounted at least 100 mm away from any adjacent structures or equipment. If these
requirements are not met, the heat generated by the GP unit’s internal components
or the VM Unit may cause the combination to fail to meet UL/c-UL standard re-
quirements.

UL1604 Conditions of Acceptability and Handling Cautions:

1. Power, input and output (I/O) wiring must be in accordance with Class I, Division

2 wiring methods - Article 501- 4(b) of the National Electrical  Code, NFPA 70
within the United States, and in accordance with Section 18-152 of the Canadian
Electrical Code for units installed within Canada.

2. Suitable for use in Class I, Division 2, Groups A, B, C and D, Hazardous Locations.

3. WARNING: Explosion hazard - substitution of components may impair suitability

for Class I, Division 2.

4. WARNING: Explosion hazard - when in hazardous locations, turn power OFF

before replacing or wiring modules.

5. WARNING: Explosion hazard - do not disconnect equipment unless power has

been switched OFF, or the area is known to be non-hazardous.

The GP2000-VM41 is a CE marked product that conforms to EMC directives
EN55011 class A and EN61000-6-2.

This marking requires the attachment of a Ferrite Core (included) to each video
cable used.

* For detailed CE marking information, please contact your local GP distributor.

CE  MARKING

Summary of Contents for GP2000-VM41
































Reviews: