Pro-face FP-790T, User Manual

Page: 40 / 57

FP-790T User Manual 4-1
4-1 Command List
This section describes the serial commands available with the FP (command
transmission from the host (PC) to the touch panel (FP)).
Chapter 4
Touch Panel Commands
1. Command List 3. Boot-up Initialization
2. Touch Panel Data Input
All data and command codes are expressed in hexadecimal numbers. (Example:
65h = 65HEX)
<Serial Command List>
Code Function
65h Turns on the backlight.
67h Turns off the backlight. (Automatic reset)
69h Turns on the click sound.
6Ah Turns off the click sound.
71h Turns on the buzzer.
72h Turns off the buzzer.
73h Turns on calibration mode.
74h Turns off calibration mode.
75h Turns on touch panel data output.
76h Turns off touch panel data output.
• All codes other than those shown here are reserved. These com-
mands should never be issued when using the FP.
• The above commands cannot be used with the FP-ME000 Touch Panel
Driver (Mouse Emulator) or the English version of the U-TP (Gunze
Corporation) software. For details, contact your local Pro-face rep-
resentative.