Pro-face FP-790T, User Manual

Page: 17 / 57

FP-790T User Manual
Specifications
2-2
2-1-3 Environmental Specifications
2-1-4 Touch Panel Specifications
Resolution (dot)
1024 X 1024
M e thod
Resistive Film (Analog)
Operating Temperature
0
0
C to 40
0
C
Storage Temperature
- 10
0
C to 60
0
C
Ambient Humidity 30%RH to 85%RH (non-condensing)
Dust
0.1mg/m
3
or less (non-conductive levels)
Atmosphere Free of corrosive gases
Atmospheric Endurance 800hPa to 1114hPa (2000 meters or lower)
Vibration Resistance
10Hz to 25Hz
(X, Y, Z directions: 30 minutes each, 19.6m/s
2
)
Noise Immunity
(via noise simulator)
Noise Voltage : 1500Vp-p
Pulse Duration : 50ns, 500ns, 1
µ
s
Rise Time : 1 ns
Electrostatic Discharge
Immunity
4k V IEC 61000-4-2
2-1-2 Structual Specifications
*1 The front face of the FP unit, installed in a solid panel, has been tested using conditions
equivalent to the standard shown in the specification. Even though the FP unit’s level of
resistance is equivalent to the standard, oils that should have no effect on the FP can
possibly harm the unit. This can occur in areas where either vaporized oils are present, or
where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If
the FP’s front face protection sheet becomes peeled off, these conditions can lead to the
ingress of oil into the FP and separate protection measures are suggested. Also, if non-
approved oils are present, it may cause deformation or corrosion of the front panel’s plastic
cover. Therefore, prior to installing the FP be sure to confirm the type of conditions that
will be present in the FP’s operating environment.
If the installation gasket is used for a long period of time, or if the unit and its gasket are
removed from the panel, the original level of the protection cannot be guaranteed. To main-
tain the original protection level, you need to replace the installation gasket regularly.
Grounding 100
Ω
or less, or your country's applicable standard
Cooling Method Natural air circulation
Weight 6.5kg [14.3lbs.] or less (Unit only)
External Dimensions
W405mm [15.94in.] x H350mm [13.78in.] x D75mm [2.95in.]
(not including rear projections)
Ratings
*1
Equivalent to IP65f (JEM 1030)