Pro-face FP-790T, User Manual

Page: 14 / 57

Introduction
1-3 FP-790T User Manual
1-2 Optional Equipment
All optional equipment listed below are products of Digital Electronics Corp.
Model No. Description
SIO cable FP61V-IS00-O
Serial interface cable used for transmission of
touch panel data between the FP and various
hosts (PCs), and for the transmission of
commands to the FP. (5 m)
Compatible with PC/AT (D-sub 9-pin female
connector) computers
RGB cable
(2.5m)
FP-CV00
Analog RGB interface cable used to output
image signals from various host (PCs) to the
FP. (2.5 m)
Compatible with analog RGB interface (D-sub
15-pin male connector).
RGB cable
(5m)
FP-CV01
Analog RGB interface cable used to output
image signals from various host (PCs) to the
FP. (5 m)
Compatible with analog RGB interface (D-sub
15-pin male connector).
Mouse/
Keyboard
cable
FP-CK01
Used to connect a mouse between the host and
the FP. (2.5 m)
Compatible with PS-2 (mini DIN 4-pin male
connector) devices.
A keyboard cannot be connected.
Optional
Software
FP-790
Mouse
Emulator
FP-ME000
*
1
Touch panel driver for Windows95, 98, NT,
2000
Backlight FP790T-BL00 Replacement Backlights (2 lights/set)
Installation
brackets
GP070-AT01
Used to secure the FP to its installation panel.
(4 brackets/set)
Installation
gasket
FP790-WP00
Used to prevent moisture from entering the FP’s
chassis. Same gasket as originally included
with the FP.
Optional
Parts
Display
protection
sheets
FP77-COVER-5P
Disposable sheets that protect the display from
dust and dirt. The touch panel can be used
when one of these sheets is attached. (5
sheets/set)
Maintenance
Parts
Interfaces
Item Name
*1 The FP-ME000 (Mouse Emulator) can only be used with a PC running the Japanese version of
Windows. When an English version of Windows is used, the English version of the U-TP (Gunze
Corporation) software is required. For purchasing information, contact your local Pro-face dis-
tributor.