20
1. Introduction
Dear customer,
Thank you for purchasing our product. You have purchased a product which
was built based on state-of-the-art technology. The product meets the require-
ments of the applicable European and national guidelines. Conformity has been
verified and the corresponding declarations and documents have been depos-
ited with the manufacturer. In order to maintain this condition and to ensure safe
operation of the product, compliance with this Operating Manual is mandatory.
This Operating Manual is exclusively intended for this product.
The manual includes instruction for the initial start-up and handling.
Please take this into account when passing this product on to third parties. Therefore,
we recommend to maintain this Operating Manual for future reference.
2. Intended use
The lamp is used for interior lighting. The lamp is intended to operate while suspended
from the ceiling. The mains voltage is used to operate the lamp (see chapter "Technical
data").
Compliance with the safety instructions and all other information in this Operating Manual
is mandatory. Read the entire Operating Manual carefully before the initial start-up. Check
the unit for damage after unpacking. If the unit is damaged, return it to the point of sale.
The lamp contains built-in LED lights.
The light source of this lamp must only be replaced by the manufacturer, by a service
technician or by an authorised person with similar qualifications.
The manufacturer cannot be held responsible for personal injury and/or property dam-
age due to improper usage.
3. Model variants and scope of delivery
The following sunflow models are available:
•
sunflow (single, slave)
•
sunflowPRO (single, slave, master with casambi light controller)
3.1 sunflow scope of delivery
•
sunflow plant light
•
Power cord 3 m long
•
C13/C14 connector cable 1 m long
•
3.5 mm mono jack lead cable 1 m long
•
Operating Manual
