Pro-dig Intelli-Tork, Owner'S Manual

Page: 12 / 16

785.856.2661 12
INSTALLING THE TORQUE HUB
1. The Intelli-Tork should be installed between the flange faces of the shaft adaptor and the pile drive tool. Please ensure
that the fastening bolts are rated to at least grade 8, and torque the bolts to the appropriate manufacturer’s guide-
lines. The total assembly is now ready to be attached to the drive motor.
a. Pile Drive Tool
b. Shaft Adaptor
c. Drive tool and Kelly Bar secured to the Torque Hub. Use the correct bolts and not screws
2. Attach the shaft adaptor to the shaft of the drive motor. Screw Piles can then be attached to the pile drive tool.
3. The unit is now ready to operate.
To power off the Intelli-Tork, hold down the power button for
2 seconds.
*There is an option to use our Handhled Nautiz device vs. using an apple or android device please call for information.
CALIBRATION
The Intelli-Tork has been precision-factory calibrated and tested. In order to maintain an accurate and
reliable reading, periodic calibration and certification is essential. THE INTELLI-TORK NEEDS TO BE
RETURNED TO OUR CALIBRATION DEPARTMENT AT LEAST ONCE A YEAR. (For further informa-
tion, please contact a member of our engineering dept.)