Pro-dig Intelli-Tork, Owner'S Manual

Page: 4 / 16

WWW.PRO-DIG-USA.COM
4
3.0 SETTINGS PAGE
All settings for your PRO-DIG
®
Intelli-Tork
©
are accessable from within the App. Simply select the settings icon
from the bottom right.
On this page you can select preferences and make changes, as appropriate to your desired usage.
1) Torque units can be selected, options are ft.lbs or Nm .
2) Thrust units can be selected, options are
lbf, N, t
or
kgf
.
3) When using the logging feature, you can choose your desired logging interval. Options are,
a)
Auto (approximately 100 samples per second)
b) On
Depth Change
(this option only creates a log entry when the depth is manually changed on the
App’s Monitor page
c) A sample taken every
1 second, 5 seconds, 10 seconds & 30 seconds
4) The Show Voltage option allows you to choose whether or not to show the Battery Voltage on the
Monitor page
5) Similarly, you can choose to show or hide the Angle here also
6) The default email address, which is the destination email address for all log files, can be entered on
this page by simply clicking in the space and typing an email address. A default email address is not
required, if one is not entered here then you’ll be prompted to enter an email address each time a log
file is emailed.
7) The Log All Raw Sensor Data option is a factory option used in fault finding. Under normal working
this should be left unselected
8) The
Network Settings
are shown for reference. Multicast enabled should normally be left selected as
non-multicast mode is for debug only.