1.
Remove components from carton. Insert either
end if the spring into the hole in the frame bracket as
shown. Needle nose pliers are recommended to ease
installation.
2.
Remove the two plastic plugs in the frame.
Install the frame bracket on to the frame as
shown using (2) #10-24 x 1 1/2” hex bolts and
locknuts. Tighten nuts securely.
3.
Install deflector plate onto the frame bracket as shown
using (2) 1/4-20 hex bolts and locknuts. Tighten nuts and
then loosen nuts just enough to allow the deflector plate to
swing freely. Attach kick arm to deflector as shown using
(2) #10-24 x 5/8” screws and locknuts.
4.
Finish assembly by attaching the opposite end of
the spring in the hole on the deflector plate as shown.
FRAME BRACKET
10-24 x 1 1/2”
Screws & Locknuts
REMOVE PLASTIC
PLUGS IN FRAME
SPRING
DEFLECTOR PLATE
SPRING
FRAME BRACKET
1/4-20 x 5/8”
Bolts and Locknuts
10-24 x 5/8”
Screws and Locknuts
KICK ARM
DEFLECTOR PLATE
FRAME
BRACKET
OPTIONAL SIDE DEFLECTOR KIT
#P15681
ASSEMBLY INSTRUCTIONS
