1.
Remove the spreader and components from carton and
place hopper up-side down on a padded surface as shown.
Slide drive and free wheel onto axle as shown with the
longer portion of wheel hub facing the frame. Both wheels
are identical to ease assembly. Secure free wheel with (1)
1/8 dia. x 1 1/4” cotter pin through the axle only. Attach drive
wheel to axle with (1) 3/16 dia. x 2” cotter pin going through
the wheel hub and the axle.
2.
Attach leg/brace to frame as shown using (4)
1/4-20 x 2 1/4” carriage bolts and locknuts.
3.
Turn spreader upright on wheels. Insert screen
into hopper sliding it under the screen clips. Attach
the upper handle assembly to handle brace with the
handle lever facing as shown. Secure with (2) 1/4-20
x 1 1/2” carriage bolts, and locknuts.
Handle Brace/Leg
1/4-20 Locknut
1/8 Dia. x
1 1/4” Cotter Pin
3/16 Dia. x
2” Cotter Pin
Free Wheel
Drive Wheel
1/4-20 X 2 1/2”
Carriage Bolt
Upper Handle
Assembly
NOTE POSITION
OF
HANDLE LEVER
1/4-20 X 1 1/2”
Carriage Bolt
Screen
1/4-20 Locknut
ASSEMBLY INSTRUCTIONS
