The
Prizelawn
®
CBR
IV
/CBR
IVSS
was factory calibrated, however calibration should be
checked occasionally to assure optimum performance.
1.
Pull the on/off lever to the “OFF” position.
Set the rate control plate to setting “B”.
2.
Flip on/off control lever to the “ON” position.
Check the port opening. It should be just open.
If adjustment is necessary, continue to step #3.
3.
Loosen the rate control knob and slide the rate
plate until the port is just opening. Loosen pointer
screw and move pointer until it aligns with “B” on
the rate plate. Retighten pointer screw.
B C DEFGH I J K L M N O P Q R S T U V W X Y Z
VIEW IS
INSIDE OF
HOPPER
Port is just
open
Pointer
Pointer Screw
Rate Control Plate
Rate Control Knob
Prizelawn
®
warrants to Purchaser the following:
1. Product will be free of defects in materials and workmanship for a period of one year from date of purchase.
2. PRIZELAWN will decide in its reasonable discretion if the part(s)/unit is defective.
3. The spreader or part(s) will be shipped to PRIZELAWN at the customer expense with a written description of defect to the
attention of PRIZELAWN WARRANTY DEPARTMENT.
4. If the spreader is used for commercial rental the Limited Warranty shall be limited to a period of 90 days.
5. All Unit and part replacement will be performed at the reasonable discretion of PRIZELAWN.
6. Labor charges are not covered and the unit need not be returned to the dealer for warranty service.
7. Proof of purchase must be supplied to PRIZELAWN.
PRIZELAWN's sole obligation under this warranty is limited to repairing or replacing the defective part. Upon replacement of any
Product or Product part, the replaced item shall become the property of PRIZELAWN. If PRIZELAWN determines that the Product
covered by this warranty requires service, PRIZELAWN shall prepay return shipping charges from PRIZELAWN. In all other
instances, such charges shall be paid by Purchaser. Except for loss or damage caused by PRIZELAWN's negligence, Purchaser
relieves PRIZELAWN of responsibility for all risks of loss or damage to the Product and its parts during the period the products are
in transit to and from PRIZELAWN.
This warranty does not extend to any Product or parts thereof that have been allowed to corrode, subjected to misuse, neglect,
accident, or modification by anyone other than PRIZELAWN or that have been affixed to any nonstandard accessory attachment
or that have been used, stored, installed, maintained or operated in violation of PRIZELAWN’s instructions or standard industry
practice. No agent, employee or representative of PRIZELAWN has any authority to bind PRIZELAWN to any affirmation,
representation or warranty concerning the Product and any affirmation, representation or warranty made by any agent, employee or
representative shall not be enforceable by Purchaser.
THIS WARRANTY EXTENDS ONLY TO THE ORIGINAL PURCHASER AND IS EXPRESSLY IN LIEU OF ANY OTHER
EXPRESS OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS OR INTENDED USE FOR A PARTICULAR PURPOSE AND OF ANY OTHER
OBLIGATION ON THE PART OF PRIZELAWN.
PRIZELAWN SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL LOSS, DAMAGE OR
EXPENSE DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF ANY OF THE PRODUCT INCLUDING, BUT NOT
LIMITED TO, DAMAGE OR LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST
OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF PURCHASER.
WARRANTY
CALIBRATION INSTRUCTIONS
