4
Symbol Definition
Type BF
Protection Against
Electronic Shock
Class II Equipment
Caution, Consult
accompanying
documents
Refer To Instruction
Manual / Booklet
Keep dry
Waste Disposal
SGS product
certification mark
Instruction for Proper Use
1.
Remove the existing mattress from the bed frame.
2.
Replace the standard mattress with mattress replacement system (orient
mattress so that the air tube is at the foot of the bed). Remove the mattress
replacement from the box and place it directly on the bed.
3.
Secure straps beneath the mattress to the bed frame.
4.
Position the control unit on the foot board of the bed frame.
5.
Attach the air tube connector and auto sensor connector to control unit’s
socket.
6.
Verify that air hoses are not kinked under the mattress.
7.
Attach cover to mattress.
8.
Plug in the control unit and turn on the power which is located on the left side
corner on control panel (the STANDBY LED will illuminate).
Summary of Contents for DynaFlow
Page 20: ......
