9
The pump unit should also be cleaned weekly using a damp soft cloth and mild
detergent.
The pump casing is manufactured from ABS plastic and if the case is soiled the
pump can be wiped down with a sodium hypochlorite solution to dilution of
1000ppm or any EPA- approved hospital grade disinfectant.
(Do not use phenol
based cleaning solution)
.
The air filter should also be cleaned and checked as often as possible at a
minimum of every six months. Air Filter can be removed by pinching center of
the filter and pulling outward from the back of the control unit.
Replace Air
Filter
1.
Remove air filter and replace with a new one.
2.
Use a soft bristle to remove dust and difficult dried-on soil.
NOTE:
1.
Do not use phenol based cleaning solutions.
2.
Switch off the electrical supply to the pump and disconnect the power cord
from the main supply before cleaning and inspection)
Waste Disposal
This Product has been supplied from an environmentally aware
manufacturer that complies with the WEEE.
This product may contain substances that could be harmful to the
environment if disposed of in places (landfills) that are not appropriate
according the legislation. Please be environmentally responsible and
recycle this product through your recycling facility at its end of life.
Filter
Summary of Contents for DynaFlow
Page 20: ......
