8
CPR Deflation
The air hose connectors can be disconnected from the controller to quick
release the air when in an emergency situation where CPR is to be performed.
5. Cleaning
The Mattress
The mattress should be cleaned on the bed weekly using a damp soft cloth and
mild detergent. If top cover or base cover becomes grossly soiled, put on clean
gloves, plastic gown and eye protection before removing top and base covers and
disposing according to standard hospital procedures for contaminated waste and
replace with clean covers.
Covers
can be washed and thermally disinfected in a washing machine by
following below procedure:
(Never use phenol based cleaning solutions)
.
Industrial
Break washes
Cold
10 minutes
Main washes
60°C (140°F)
6 minutes
Main washes
70°C (158°F)
10 minutes
Extraction
2 minutes
Cold Rinses
Extraction
5 minutes
Domestic
Pre-wash
Cold
Main Wash
70°C (158°F)
10 minutes
Extraction
2 minutes
Cold Rinses
Extraction
5 minutes
Tumble Drying or Tunnel Drying is not recommended.
Mattress Cells can be wiped over with a solution of sodium hypochlorite1000ppm
or any other non-phenolic germicidal solution.
The Master Control Unit
Caution
SWITCH OFF THE ELECTRICAL SUPPLY TO THE PUMP AND DISCONNECT THE
POWER CORD FROM THE MAIN SUPPLY BEFORE CLEANING AND INSPECTION
Summary of Contents for DynaFlow
Page 20: ......
