14
Recommended separation distance between
portable and mobile RF communications equipment and the
DYNAFLOW
The DYNAFLOW is intended for use in an electromagnetic environment (for home
healthcare) in which radiated RF disturbances are controlled. The customer or the
user of the DYNAFLOW can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the DYNAFLOW as recommended
below, according to the maximum output power of the communications
equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of
transmitter
m
150 kHz to 80
MHz
d =1,2
√P
80 MHz to 800
MHz
d =1,2
√P
800 MHz to 2,7
GHz
d =2,3
√P
0,01
N/A
0,12
0,23
0,1
N/A
0,38
0,73
1
N/A
1,2
2,3
10
N/A
3,8
7,3
100
N/A
12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance
d
in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where p is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects and
people.
* During DIP interference, the pump will outage these are normal. The pump outage does not affect
the motor operation.
Summary of Contents for DynaFlow
Page 20: ......
