52
Date:
20-11-2014
Data name:
esc300-2-v12a_EN
ESC300 (swv-1.06)
Author:
Heiko Lange
Pages:
72
© P. Prinzing GmbH - 89173 Lonsee-Urspring (Germany)
Service: +49 (0) 7336 - 961018
* Option / depends on design
Service
8.5. The tension control
The tension control...
- is monitoring the mains voltage of your system
- is adapting the breaking current of the motors automatically to the voltage
fl uctuations in the net
When there are voltage errors in the single phases, or is voltage limits will exceed
or fall below, the error message „voltage error“ will be displayed.
The sensibility of the tension control can be set in the menu item „service“. Factory
provided is 15. Meanings of the values:
00 = voltage control off
01 = sensibility maximum (very sensitive)
99 = sensibility minimum (less sensible)
Switch ON/OFF the voltage control or change the sensibility:
1. Open the menu item „service“
Main menu >>> main settings >>> service
2. Chose „voltage control“
Use the arrow buttons up/down for the selection
3. Press
ENTER
( ) to edit the selection
4. Press the
ARROW BUTTONS
( //
/
) to change the value
Settings see above (e.g. „00“ = tension control off)
5. Press
ENTER
( ) to save the settings
8.6. Die SD-card (data saver)
The SD-card is in a card support on the control board, up on the left side, next to
the power supply and has got the following functions:
- automatic and manual saving (export) of all parameters
- logging of the scraper moves and messages (till the SD-card is full)
- software-update for the system software (board „control“)
- import of saved parameters, e.g. after hardware exchange or data loss
Memory card-type: only SD-cards, SDHC-cards will be
not
supported!
Memory space:
recommended 2 GB (4 GB and more will
not
be supported)
Type:
FAT (standard) or FAT32. NTFS will
not
be supported!
You can fi nd the data on the SD-card as follows:
- on the control by the menu service >>> menu item SD-card
- you are able to open the .csv-fi les on the PC standard-tabulation program (e.g.
MS Excel)
ATTENTION
Change the SD-card only when the control is switched
off (main switch OFF)
52/1
Menu „service“ - settings voltage control
52/2
Menu service >>> SD-card
52/3
File structure on the SD-card
