27
Date:
20-11-2014
Data name:
esc300-2-v12a_EN
ESC300 (swv-1.06)
Author:
Heiko Lange
Pages:
72
© P. Prinzing GmbH - 89173 Lonsee-Urspring (Germany)
* Option / depends on design
Service: +49 (0) 7336 - 961018
Commissioning
5.4.2 Do the motor test (rotating direction)
By the motor test, you are able to defi ne the rotating direction of the drive winch.
Do the motor test...
- after a new installation of drive winches
- after repairing or changing of the drive motor
- after connection- or repair works on the motor feed line or its connection
clamps
Do the motor test:
1. Chose in the main menu an alley (1...6)
Use the arrow button up/down for the selection
2. Chose in the menu alley (1...6) the item „setup“
Use the arrow buttons up/down for the selection
3. Press
ENTER
( ) to open the „setup“
4. Chose the parameter „Motor test“
Use the arrow buttons up/down for the selection
5. Press
ENTER
( ) to open the item „motor test“
6. Test the rotating direction of the motors
Button „forward“ = motor 1 - button „backward“ = motor 2.
7. After ending the motor test press the button
ESC
to leave the menu
Press the button ESC till the operation mode will be displayed, or navigate to
another menu item.
27/1
Menu item motor test
INFO
Check the rotating direction of the motor always directly on the winch (if necessary with 2.
persons).
The motors will turn as long as the respective button will be pressed (dead man operation).
If its necessary, change the rotating direction of the drive winches on the connecting
clamps of the control (only specialist!)
5.5. Do the program „learning“
For the automatic operation of your dung removal system it is necessary to do the program „learning“. During the „learning“
the control determines the optimal breaking current of the motors and the required driving time between the stops. Out of
the learned values, the parameters for the programs 1+2 will be saved automatically.
Do the program „learning“ ...
- when commissioning the dung removal system
- after constructional changes on the dung removal system
- after changing the performance (abrasion, change the fl ooring, weather conditions) of scraper/walkway
- when you have several faulty switching on the system (obstacle, overload)
INFO
If you don´t do the program „learning“, the dung removal system is not operable. The
manual operation can only be used limited automatic is not possible.
27/2
Button for the motor test on the remote
(1) - backwards, (2) - forwards
