Printronix L5520, User Manual

Page: 59 / 246

Active Emulation (If Installed)
59
Active Emulation (If Installed)
This Active Emulation function allows the user to activate an
emulation. There are two methods for selecting the desired
emulation. The first is by selecting the emulation directly from the
printer menu. The second is by sending a host command which will
switch the emulation automatically (see the appropriate
Programmer’s Reference Manual for details).
The printer can contain more than one emulation at a time. These
emulations are mutually exclusive and only one can be active at a
time. The menu above selects the emulation to be active. The
entries in this menu depend upon the options installed in the
printer.
When changing from one emulation to another, the printer will load
the power-up configuration. Thus, any configuation setttings done
before selecting these emulations and not saved in NVRAM will be
lost.
IMPORTANT
In order to configure an emulation, that emulation must be
selected in the ACTIVE EMULATION menu; other emulations
not selected will not appear in the menu.
PCL5*
IGP/PGL & LP+
IGP/VGL & LP+
Active
Emulation
1
IGP/PGL*
IGP/VGL
Active
IGP
2
* Factory Default
1
PCL5 Emulation
2
IGP/LP+ Emulation