Printronix L5520, User Manual

Page: 111 / 246

Flash Messages
111
Flash Messages
Table 2. Flash Messages
LCD Messages Explanation Required Action
CLEARING PROGRAM
FROM FLASH The program successfully
loaded into printer RAM and the
checksum matched. The printer
is now deleting the old program
from the flash file system. None.
DIAGNOSTICS
PASSED The printer self-test has
finished, and there were no
errors. None.
ERROR OCCURRED
FLUSHING QUEUES * An interim message that
displays while the printer
discards host data it cannot use
because a fault condition exists.
While this message displays,
the asterisk (*) rotates. Wait. When the asterisk
(*) stops rotating, a
different fault message
will appear.
Troubleshoot the final
message.
ERROR: DC PROGRAM
NOT VALID There is no emulation software
installed in the DC flash
memory, or the emulation
software in the DC flash
memory is corrupted. Power off the printer and
download the program
again. If the message
persists, contact your
service provider.
ERROR: DRAM AT
ADDRESS
xxxxxxxx
The printer found a defective
DC DRAM memory location. Contact service
provider.
ERROR: FLASH TYPE
IS NOT SUPPORTED This type of flash memory
SIMM is unsupported, or the file
system in the DC flash memory
is corrupted. Power off the printer and
download the program
again. If the message
persists, contact your
service provider.
ERROR: FLASH
DID NOT PROGRAM The printer encountered an
error while trying to program the
DC flash memory. Power off the printer and
download the program
again. If the message
persists, contact your
service provider.