Printronix L5520, User Manual

Page: 27 / 246

27
2
Initial Setup
Installation Overview
The installation and setup of your printer is intended to be done by
a service provider trained and authorized by Printronix. Your
service provider is also responsible for doing a preinstallation site
survey, unpacking the printer, connecting the power and host data
cables, and installing the first set of consumable items in the
printer. Depending on the terms of your service contract, your
service provider might also power on your printer and configure it.
As the owner of the printer, it is your responsibility to prepare the
printer site. This includes providing adequate ventilation and power
for the printer.
Loading Paper
When loading paper, be sure the leading edge of the paper has a
clean, separated perforation without ragged edges.
NOTE: You do not need to power off the printer to replace paper. If
you leave the printer on and replace the paper, it will
resume printing where it left off when you put it online.
To load paper, perform the following steps. Repeat this procedure
whenever top-of-form must be reset (e.g., after clearing a paper
jam, loading new paper, etc.).