Printronix L5520, User Manual

Page: 68 / 246

Chapter 3
Host Interface Menus
68
Prime Signal
•
Enable. The parallel port will do a warm start (reboot) when the
host asserts the Prime Signal.
•
Disable. The parallel port will not do a warm start (reboot)
when the host asserts the Prime Signal.
TOF Action
•
Reset. A form feed is performed before a warm start (reboot)
when the Prime Signal is asserted from the host. This setting is
used only if the Prime Signal parameter is enabled.
•
Do Nothing. Nothing occurs before a warm start (reboot) when
the Prime Signal parameter is asserted.
Buffer Size In K
Configures the amount of memory allocated for the Dataproducts
parallel port buffer. You can specify between 1 and 128 Kbytes.