Princeton Instruments PI-MAX4, Manual

Page: 152 / 326

152 PI-MAX
®
4 System Manual Issue 9
7.5.3 Swept Gate Experiment [Variable Width, Variable Delay]
The procedure for conducting a Swept Gate experiment with variable width and variable
delay is the same as that for conducting a Swept Gate experiment with fixed width and
variable delay with the following parameter configuration changes:
• Gate Delay Start
value does not equal
Gate Delay End
value;
• Gate Width Start
value does not equal
Gate Width End
value.
Refer to Section 7.5.3, Swept Gate Experiment [Variable Width, Variable Delay] , for
additional information.
7.5.4 Static Gate Experiment [Fixed Width, Fixed Delay]
The procedure for conducting a Static Gate experiment is similar to that for conducting a
Swept Gate experiment with the following parameter configuration changes:
• Gate Mode
:
Repetitive
;
• Gate Width
and
Gate Delay
must be configured using the
Repetitive Gating
Setup
dialog as shown in Figure 7-31 .
Figure 7-31: Repetitive Gating Setup Dialog
Refer to Section 7.5.4, Static Gate Experiment [Fixed Width, Fixed Delay] , for additional
information.
4411-0139_0069