Princeton Instruments NIRvana-LN, User Manual, Page: 91 / 122

Chapter 10 Troubleshooting 91
5. Once the driver installation has been completed, it may be necessary to reboot the
computer.
If prompted for a reboot, select:
• Yes
to reboot the host computer immediately, or
• NO to delay rebooting the computer until a later time.
When delaying the reboot, dismiss/close the
eBUS Driver Installation Tool
dialog.
6.
Once the computer has been rebooted, verify that the network connection has been
established.
10.6.2 LightField Applications
Perform the following procedure to restore an Ethernet network connection for LightField
applications:
1.
Navigate to the directory in which the
EbDriverTool64.exe
is stored.
The file is typically stored on the host computer within the default Pleora directory (or
one of the subdirectories):
C:\Program Files\Common Files\Pleora
2.
Double click on the file to launch the application. Figure 10-6 illustrates the installation
tool dialog that is displayed.
Figure 10-6: Typical 64-Bit eBUS Driver Installation Tool Dialog
3.
Review the list of Ethernet cards displayed. Select the desired Ethernet card, and within
the
Action
column, select
Install Manufacturer Driver
from the pull-down menu.
4.
Click on the
Install
button to initiate the installation of the appropriate driver.
5.
Once the driver installation has been completed, it may be necessary to reboot the
computer.
If prompted for a reboot, select:
• Yes
to reboot the host computer immediately, or
• NO to delay rebooting the computer until a later time.
When delaying the reboot, dismiss/close the
eBUS Driver Installation Tool
dialog.
6.
Once the computer has been rebooted, verify that the network connection has been
established.
4411-0145_0046