Princeton Instruments NIRvana-LN, User Manual, Page: 90 / 122

90 NIRvana
™
-LN System Manual Issue 4
10.6 Ethernet Network is Not Accessible
When the Princeton Instruments software is installed,
all
Intel Pro/1000 interface card
drivers found on the host computer are updated with the Intel Pro/1000 Grabber Adapter
(Vision High-Performance IP Device) driver provided by Pleora Technologies, Inc. If this
computer is connected to an Ethernet network via an Intel Pro/1000 card that does not use
the Pleora driver, the network connection will be broken. The tool used to restore the
network connection depends on whether you are using WinX (32-bit) or LightField (64-bit).
10.6.1 WinSpec/32 Applications
Perform the following procedure to restore an Ethernet network connection for WinSpec/32
applications:
1.
Navigate to the directory in which the
EbDriverTool32.exe
is stored.
NOTE:
The file may also be named EbDriverTool.exe .
The file is typically stored on the host computer within the default Pleora directory (or
one of the subdirectories):
C:\Program Files\Common Files\Pleora
If the file cannot be located on the host computer, it may be downloaded from the
following location:
ftp://ftp.princetoninstruments.com/public/Software/Off
icial/WinX32/GigE/
2.
Double click on the file to launch the application. Figure 10-5 illustrates the installation
tool dialog that is displayed.
Figure 10-5: Typical 32-Bit eBus Driver Installation Tool Dialog
3. Review the list of Ethernet cards displayed. Select the desired Ethernet card, and within
the
Action column, select Install Manufacturer Driver from the pull-down menu.
4.
Click on the
Install
button to initiate the installation of the appropriate driver.
4411-0145_0045