FocusMonitor FM+
35,0(6
17
Revision 03/2019 EN
7.3
Installation position
You can install the device in different positions (see Fig. 7.4 on page 17). The standard position is intended
for beam incidence from above.
When accessibility is limited, you have the option of installing the device upside down with a rotated measur-
ing tip (see chapter 18.5 on page 52).
A
Upside down installation
with
turned measuring tip
Standard installation
Mounting surface
Beam incidence
Mounting surface
B
Fig. 7.4:
Mounting options for the FocusMonitor FM+
To prevent transport damage, the measuring tip is disassembled when delivered. It is installed with the
curved part facing towards the beam source (see Fig. 7.5 on page 17). Further information on mounting
the measuring tip is provided in chapter 18.5 on page 52.
Beam incidence
Fig. 7.5:
Direction of the measuring tip during installation
The FocusMonitor FM+ can also be mounted on a vertical surface so that it can be operated with
the beam entering horizontally. Ensure that it is fastened securely in the horizontal direction.
