120
Chapter 5 CLI
• CMOS Configure Restore Target (1_10_1_2)
Enter the Server Blade slot number setting of the restoration target.
Parameter
Contents
1. backup
Backs up the BIOS information of the selected Server Blade.
2. smart-restore
Perform smart restore of the data backed up in this slot to the Server Blade
installed in the slot selected in "CMOS Configure Restore Target". BIOS
information can only be restored if the MAC address and slot number of the
Server Blade that backed up BIOS information and of the restore target is the
same.
3. force-restore
Perform force restore of the data backed up in this slot to the Server Blade
installed in the slot selected in "CMOS Configure Restore Target". BIOS
information can be forcibly restored even if the MAC address and slot number
of the Server Blade that backed up BIOS information and of the restore target is
not the same.
This function cannot be used when the model of the Server Blade that backed up the CMOS
settings and the restore destination Server Blade differ. Can also not be used when the BIOS
version differs.
Information that is configured with the BIOS setup utility only can be backed up and restored. BIOS
information of the onboard SCSI array controller cannot be backed up nor restored.
Backup and restore results are recorded in the Management Blade event log.
+------------------------------------------+
| |
+------------------------------------------+
Page_1_10_1_2
CMOS Configure Restore Target : 1
Please Input New Value (Press enter to quit)
-->>
