77
PRIMERGY BX600 Management Blade Hardware Guide
❑
: Parameter
• 3. Telnet IP Filter Table (1_1_14_3)
Performs IP settings that permit Telnet service.
A maximum of 10 IP that permit Telnet can be registered.
255.255.255.255, that was set at the time of purchase, does not perform IP filtering. When
performing IP filtering, delete it as necessary.
Parameter
Setting
Contents
1. Set Telnet Enable
❑
enable
❑
disable
Sets Telnet service enable/disable. Settings become valid
after restarting the Management Blade.
2. Set Telnet Port
-
Sets the port number of telnet.
Settings become valid after restarting the Management
Blade.
3. Telnet IP Filter Table
-
Performs IP settings that permit Telnet service.
"• 3. Telnet IP Filter Table (1_1_14_3)" (p.77)
4. Telnet Disconnection
-
The Telnet connection is forcibly turned OFF. Perform
operations following the directions on the screen.
5. Set telnet SSL Enable
❑
enable
❑
disable
Sets whether Telnet SSL is to be used.
Important:
In order to use SSL, it is necessary to enable SSL version 3 only in the
Telnet client software.
+------------------------------------------+
| |
+------------------------------------------+
Telnet IP Filter Table page_1_1_14_3
(1) Telnet IP Filter 1 : 255.255.255.255
(2) Telnet IP Filter 2 : 0.0.0.0
(3) Telnet IP Filter 3 : 0.0.0.0
(4) Telnet IP Filter 4 : 0.0.0.0
(5) Telnet IP Filter 5 : 0.0.0.0
(6) Telnet IP Filter 6 : 0.0.0.0
(7) Telnet IP Filter 7 : 0.0.0.0
(8) Telnet IP Filter 8 : 0.0.0.0
(9) Telnet IP Filter 9 : 0.0.0.0
(10)Telnet IP Filter 10: 0.0.0.0
Enter selection or type (0) to quit:
