84
Chapter 5 CLI
●
2. System Power Supply (1_3_2)
Displays the state of the power supply.
❑
: Parameter
Parameter
Setting
Contents
1. System Power Supply Control
❑
power on
❑
Hard Power off
❑
graceful
shutdown and off
Sets the main power supply of the chassis.
When using refer to "6.2 Points to Note about Remote
Power OFF and the Shutdown Function" (
• power on
Turns on the main power supply of the chassis.
• Hard Power off
Turns off the main power supply of the chassis.
• graceful shutdown and off
"graceful shutdown and off" in "1. Server power" in
1. Server Blade Control Information (1_4_1_1)"
p.97) is ordered for all the installed Server Blades
and the power is turned off.
Important:
When using this function it is necessary to
make various settings to the installed Server
Blades. For details, refer to "6.2 Points to
Note about Remote Power OFF and the
Shutdown Function" (
p.139). Do not select
this when performing operations for Server
Blades that are not supported, because there
is a fear that unexpected operations such as
ACPI shutdown or power off may occur.
System Power Supply Status
-
Displays the status of the overall power supply.
System Power Supply
Redundancy
-
Displays "yes" when the power supply is redundant and
"no" when not redundant.
4. System Power Supply Unit
Table
-
Displays a list of the PSUs installed.
"• 4. System Power Supply Unit Table (1_3_2_4)"
+------------------------------------------+
| |
+------------------------------------------+
System Power Supply page_1_3_2
(1) System Power Supply Control : Hard Power off
(-) System Power Supply Status : not-ready
(-) System Power Supply Redundancy : yes
(4) System Power Supply Unit Table
(5) System Power supply Redundancy Mode: 3+1
Enter selection or type (0) to quit: