Software Setup 1
Section 1: Software Setup
Thank you for purchasing the PTPublisher NE software.
For additional help with the PTPublisher software please refer
to the software help files. These can be accessed by
clicking the
? icon
located in the upper right corner of
any PTPublisher window.
Note on Terms and Conventions
Robot and Disc Publisher and Publisher
will be used inter-
changeably. They all refer to the hardware that burns, prints
and transports the discs.
Server Computer
refers to the computer that the Disc
Publisher is connected to which is the same computer that is
running the PTPublisher service.
Network Robot
refers to the Disc Publisher as it is seen by any
client computer running PTPublisher. Network robots can only
be connected to server computers.
A. INSTALLING THE SERVER SOFTWARE
After you have downloaded the server software, install it on a
computer which has the Disc Publisher physically connected
to it.
Reboot the computer to start the PTPublisher Service. The
server software installs as a Windows service so it will not
appear in the list of installed programs after it has been
installed. However, the program files will be installed on the
computer’s local hard drive in the Program Files - Primera
Technology folder.
Note:
Before using the Network Software, you must also install all software
from the Disc Publisher installation disc according to that products
manual.
TOC
PTPublisher.qxd 4/28/2008 6:50 AM Page 1
