Primera FX400e, User Manual

Page: 15 / 30

4. The detail functions in the Printer Function Group are listed as
below.
G. ADJUSTING THE LABEL STOCK SENSOR
If you are using label stock with black marks on its back, it may
become necessary to adjust the label stock sensor. The sensor is situ-
ated between the paper guides in the internal of the printer.
Normally the sensor is placed in the middle where the small arrow
is pointing towards the sensor. But some label stock has its black
marks only at the rims of the linen and the sensor needs to be
moved to this position.
Hardware and Software Setup
11
Description
Calibrate the sensor specified in the Printer Setup group media sensor field.
Setup the IP address, subnet mask, gateway for the on board Ethernet.
Synchronize printer Real Time Clock with PC.
Print a test page.
Ignore the downloaded AUTO.BAS program.
Initialize the printer and restore the settings to factory default.
To activate the printer dump mode.
Ignore the downloaded AUTO.BAS program.
Print printer configuration.