Primera FX400e, User Manual

Page: 20 / 30

16
Printing
2. Choose Create a new Label from the New Label Wizard and
click on Finish
3. You will see the Label Setup Wizard . This will guide you
through setting up your label
a. Set the dimensions of your label and unit of measure and
click
Next .
b. Select your printer. This should be the Primera FX400e .
Then choose the orientation of the labels and click
Finish
.
4. Click the Line Button, then click on a corner of the label and
pull the line to the other corner of the label. Then spread the
line with the "edit handles" over the whole label until it is
completely covered.
5. You are now ready to print your label. Click File - Printer
Settings to adjust quality, color matching etc. See Section 3B for
more information. Click File then Print from the main menu.
Choose your number of copies and click OK .
B. PRINTER DRIVER SETTINGS
Once the printer driver has been successfully installed, you will
need to setup the driver with the appropriate print options. Refer to
the following steps to change or verify your default printer driver
preferences. These settings will apply to all new designs created in
NiceLabel or other programs after the preferences were changed.
Existing labels saved in NiceLabel will not be affected since the pref-
erences are saved with the label. To change these preferences you
will have to change printer preferences through Nice Label. (File
Menu - Printer Settings)
To find Driver Settings:
Click the Start button, choose Printers and Faxes . Right-click on the
Primera FX400e Icon and select Printing Preferences from the drop-
down menu.
The preferences screen will appear.
NOTE : Most applications allow you to change these same printer driver options
from their "Print" and/or "Printer Setup" screens. Some applications such
as NiceLabel save your settings with the label,
others use settings only for the current print job just sent to the printer.