Primera 510152, User Manual

Page: 17 / 48

Ink Ribbons and Optical Media 7
4. Confirm that the end of the Ribbon Cartridge with the
plastic front panel labeled "Optical Disc Printer" is closest
to you. This is the Supply End. The other end is the Take-
Up End.
5. Lift up the front Ribbon Hold-Down Bracket.
6. Lift up the rear Ribbon Hold-Down Bracket by pulling the
bracket up and pressing backwards, exerting extra pressure
on the side with the gear. You will notice that the shaft of
the Ribbon Hold-Down Bracket is slotted on the gear side.
Make certain that you press toward the back of this slot in
order to lift the Hold-Down Bracket properly. DO NOT
FORCE THE BRACKET OPEN.
Supply End
Take-up End
Gear Side
510152.qxd 11/16/01 10:33 AM Page 7