background image

Getting Started 1

Section 1:

Getting Started

THANK YOU…

Se

...for purchasing the Optical Disc Printer. This printer is the

perfect way for you to label all of your CD-Rs, 

DVD-Rs

 or

other 120mm optical media quickly and easily. The Optical

Disc Printer lets you print razor-sharp text, vibrant graphics

and bright spot colors directly onto the surface of ordinary,

lacquer-finish discs. Operation is simple, quality is high, and

printed images are highly durable and completely waterproof.
To begin using the printer, please read this manual carefully.

This User's Manual is your complete step-by-step guide to

quickly and easily setting up and printing with your new

Optical Disc Printer!

A. CHOOSING A GOOD LOCATION

• Place the printer in a location with adequate air circulation

to prevent internal heat build up. 

• Do not place the printer near heat sources such as radiators

or air ducts, or in a place subject to direct sun-light,

excessive dust, mechanical vibration or shock.

• Allow for adequate clearance in front of the printer to

accommodate the length of the unit with its 

CD Tray

 open.

B. UNPACKING AND INSPECTION

While unpacking your printer, inspect the carton to ensure that

no damage has occurred during shipping. Make sure that all

supplied accessories are included with your unit. The

following items should be included:
• Power Adapter and Power Cord
• 

Printer Driver

 and Application Software CD-R

• Black Monochrome Ink Ribbon
• Warranty Statement and Registration Card
• Quick Start Guide and Other Printed Information
Save the carton and packing materials. They will come in

handy later if you ever need to transport the printer.

510152.qxd  11/16/01  10:33 AM  Page 1

Summary of Contents for 510152

















































Reviews: