Primedic DefiMonitor XD Operating Instructions Manual Download Page 39

Page: 39 / 116

Preparatory measures before (initial) start-up

METRAX GmbH

DefiMonitor XD 21324 / GB / K05

39 / 116

Preparatory measures before (initial) start-up

5.1

Unpacking

After delivery, first of all check the packaging and the device for transport damage.

If you notice any damage to the device, immediately contact your transport company, dealer or
directly contact technical services at METRAX GmbH, stating the device number and
describing the damage to the device.

DANGER

Definitely do not use the device if you know of any damage.
Endangering health cannot be ruled out.

Satisfy yourself that the scope of delivery is complete in accordance with the enclosed delivery
note.

5.2

Inserting / Changing the SaveCard

Fig. 20

: PRIMEDIC™ DefiMonitor XD

–

SaveCard

(1)

SaveCard slot

(2)

SaveCard removal button

(3)

Cover

Summary of Contents for DefiMonitor XD





















































































































Search results

Summary of Contents for DefiMonitor XD

Reviews:

Primedic DefiMonitor XD, Operating Instructions Manual, Page: 39 / 116

Search results

Summary of Contents for DefiMonitor XD

Reviews: