>
Using the SP31.7 Multi-Channel Processor
4
To dim the front panel display
•
Press the
DIM
button on the remote control.
The display will dim to a single bar. The normal display will
reappear while you adjust any settings.
To restore the front panel display
•
Press the
DIM
button again.
SWITCHING ON AND OFF
To switch on
•
Use the switch under the left-hand edge of the front
panel.
During normal operation you can leave the SP31.7 switched
on and in standby.
To switch to standby
•
Hold down the
STANDBY
button on the front panel or
the
STBY
button on the remote control.
When the SP31.7 is in standby the red STANDBY indicator
will be illuminated.
To switch on from standby
•
Operate any of the front panel controls, or press any of
the arrow keys on the remote control.
SELECTING A SOURCE
The SP31.7 Multi-Channel Processor allows you to define up
to 16 sources. Each source can use one of the eight digital
and eight analog inputs, and any source can be combined
with one of the video inputs. Alternatively, a multi-channel
source can be defined using analog inputs 5 to 8.
When the SP31.7 Multi-Channel Processor is first supplied
the eight standard sources shown opposite are already set
up for you.
You can simply disable any of these sources that you do not
need; see
Removing sources, page 19. You can also change
any source to use different inputs, or configure your own
sources with any name you choose and using any particular
inputs as appropriate for the source.
Source
Audio
Video
Surround mode
Description
CD
Analog 1
None
Bypass
High quality CD
player
DVD
Digital 2
S-Video 1
2-CH
DVD player
TapeD
Digital 3
None
PLII PL
Digital tape
recorder or
minidisc player
Laser
Digital 7
S-Video 2
PCM 2-CH
LaserDisc
player
Tuner
Analog 2
None
Stereo
FM radio tuner
TV
Analog 3
Video 1
PLII PL
Television or
monitor
TapeA
Analog 4
None
Stereo
Analog tape
output
Sat
Analog 5
Video 2
PLII PL
Satellite
receiver
To select a source
•
Turn the
INPUT SELECTOR
control on the front panel
until the name of the source is shown on the front panel
display.
For example:
AC-3
P.L
Tuner
46
VOLUME
•
Alternatively, press the
A
or
V
buttons on the remote
control to step between sources.
The current source is also shown on the on-screen display:
§2 Using
26/7/02, 12:51 pm
4
Summary of Contents for SP31.7
