![background image](http://html1.mh-extra.com/html/primare/sp31-7/sp31-7_user-manual_1601052029.webp)
>
25
Saving the configuration
This chapter explains how to save the configuration of your SP31.7, and how to recall a saved
configuration, or reset the SP31.7 to the factory settings.
INTRODUCTION
Once you have defined your own custom set of inputs, and
have calibrated the speaker settings and other configuration
options to suit your own requirements, you should save your
settings permanently in the SP31.7. You can then return to
your saved settings at any time using the
RECALL
SETTINGS
option to undo any subsequent configuration
changes.
If the SP31.7 was set up for you by an installer, the installer
will have saved a set of installer settings. You can also return
the SP31.7 to these settings using the
RECALL
INSTALLER SETTINGS
option.
Finally a
RECALL FACTORY SETTINGS
option is
provided, to return the SP31.7 to the default factory settings.
After saving or recalling settings always wait at least 10
seconds before switching off the unit using the mains switch.
To save your settings
•
Highlight
MEMORY
in the
SETUP MENU
and press
the
SELECT
button on the front panel or remote control
to select it.
The
MEMORY MENU
will be displayed:
•
Highlight
SAVE SETTINGS
and press the
SELECT
button on the front panel or remote control to select it.
After a short delay a message will confirm that the settings
have been saved:
•
Wait 10 seconds to allow the settings to be completely
stored.
•
Press the
MENU
button on the front panel or remote
control to return to the
MEMORY MENU
.
To recall your settings
•
Highlight
RECALL SETTINGS
in the
MEMORY
MENU
and press the
SELECT
button on the front panel
or remote control to select it.
The following screen then confirms that your settings have
been recalled:
§8 Saving
26/7/02, 12:52 pm
25
Summary of Contents for SP31.7
