Primare P30, User Manual

Page: 6 / 36

>
Introduction
2
Easy to set up
The P30 is also exceptionally easy to set up for a perfectly balanced surround
sound. Simply plug a microphone into the appropriate P30 input, and position
it at the listening position. The built-in calibration test will then balance the level
of each output to give a correct sound image for your system and the room
you are listening in.
U S I N G T H E P 3 0 W I T H O T H E R P R I M A R E P R O D U C T S
Although the P30 is flexible enough to work with virtually any other equipment
you have in your system, it is ideal for use with the other products in the
Primare range, including the Primare A30.5 Multi-Channel Amplifier and the
Primare V20 DVD Player. A particular benefit of using the P30 with the Primare
DVD Player is that you can control both units with the single remote control, to
give you a fully integrated system with the simplest possible user interface.
T E C H N I C A L S P E C I F I C A T I O N
Analogue inputs 1 balanced, 7 RCA.
Digital inputs 1 balanced, 5 coax, 1 TOSlink.
Video inputs 2 composite, 3 S-Video.
Balanced analogue outputs Front left and right
Analogue outputs Rear left and right, center and sub.
Record Analogue, 1 coax. 1 TOSlink
2 composite, 2 S-Video
Modes Dolby Digital, Dolby Pro Logic, Music surround, DTS.
Calibration Automatic or manual with calibration microphone.
Video NTSC/PAL, S-Video and composite.
Analogue data
Bandwith 1Hz – 100kHz, -1dB
THD <0.005%, 20Hz-20kHz
Signal-to-noise -110dB
Frequency response <10Hz – 100kHz, -1dB
Input impedance 15k
Ω
, unbalanced
10k
Ω
, balanced
Output impedance 50
Ω
Digital data
Frequency response 20Hz – 20kHz,
±
0.2dB
THD+noise 0.005% @1kHz
Dimensions (WxDxH) 430 x 385 x 100mm
Weight 10kg