Primare P30, User Manual

Page: 29 / 36

<
Setting up the sources
25
E D I T I N G A S O U R C E
To edit an existing source
• Highlight INPUT SETTINGS in the SETUP MENU and press the SEL
V
button to select it.
• Use the SEL
A
and SEL
V
buttons to select the input you want to edit.
• Use the VOL
V
or VOL
A
buttons to highlight the options for the inputs,
and use the SEL
A
and SEL
V
buttons to modify them as required.
The options are explained in the following table:
Option Description
STATUS ENABLED or DISABLED to specify whether the source can be selected from
the front panel or remote control.
ALIAS A name of up to six characters for the source; see To edit the source alias
opposite.
AUDIO The audio input used for the source:
DIGITAL 1
to
DIGITAL 8
, or
ANALOG 1
to ANALOG 8 .
VIDEO The video input used for the source: NONE , VIDEO 1 to VIDEO 4 , or
S-VIDEO 1
to
S-VIDEO 3
.
OFFSET Allows you to vary the sensitivity of analog sources between - 20.0 dB to
+ 20.0 dB in 0.5 dB steps.
MODE The default surround mode for the source:
PCM 2-CH
,
STEREO
,
PRO LOGIC , STADIUM , CLUB , NATURAL , PARTY , or BYPASS .
TV SYSTEM Specifies the TV system for the video input: NTSC , PAL , or DEFAULT .
To edit the source alias
•
Highlight
ALIAS
in the
INPUT SETTINGS
menu and press the
SEL
V
button to edit the alias.
• Select the character you want to edit using the VOL
A
and VOL
V
buttons.
The currently selected character is shown highlighted with a block.
• Press the SEL
A
and SEL
V
buttons to change the currently selected
character.
Each key press steps the character through the upper-case letters,
lower-case letters, digits, symbols, and space.
• Press the
_
(or MENU ) button when you have finished entering the alias.
To add a new source
• Proceed as for editing a source, but select an unused source as the starting
point.