AdvAntAge - digitAl vAv diffusers
PRODUCT OVERVIEW & INSTALLATION INSTRUCTIONS
3
acutherm.com
|
ACUTHERM ADVANTAGE - Manual
drone Power supply Connection
ADVD
(See
figure 3, figure 4, figure 5, figure 6
)
• Unit has two RJ12 Jacks to make daisy chain connections
for 24 VAC and 2-10 VDC control signal from master unit.
• C35 (35’ plenum rated cable) supplied with RJ12 modular
plugs at both ends. Use cable to connect unit with
DRONE OUT (Fig. 4) on Advantage Master (ADVM) or
previously connected ADVD using a free Drone output
Drone Jack (Fig. 5). Cable length may be extended by
using a CC (cable connector) for longer runs.
• A maximum of five ADVD can be supported by one
Advantage Master (ADVM).
• Each ADVD draws 3.0 VA.
APM
PPM 115 / 277 POWER SUPPLY (ONE OUTPUT JACK)
= MASTER
CS
CS
CS
CS
POWER JACK
DRONE JACK
= DRONE
USE C35 CABLES
figure 6 - lAYOut eXAMPles
figure 5 - drOne JunCtiOn PAnel
DRONE INPUT / OUTPUT
RED LED (2-10 VDC DRONE SIGNAL)
GREEN LED (24 VDC POWER)
APM 115 / 277 POWER SUPPLY (6 MAX DIFFUSERS
PER JACK. 15 MAX DIFFUSERS PER APM)
= MASTER
POWER JACK
DRONE JACK
= DRONE
USE C35 CABLES
figure 7 - lAYOut eXAMPles
PPM 115 / 277 POWER SUPPLY (ONE OUTPUT JACK)
TR115 / 277 POWER SUPPLY
= MASTER
POWER JACK
DRONE JACK
= DRONE
USE C35 CABLES
TR115 / 277 POWER SUPPLY
= MASTER
POWER JACK
DRONE JACK
= DRONE
USE C35 CABLES
CsJ
CsJ
CsJ
CsJ
CsJ
CsJ
