PRG VARI LITE VL5, Service Manual

Page: 34 / 142

24 VL5 ™ WASH LUMINAIRE SERVICE MANUAL
Figure 2-7: Disconnecting Bellows Motor Extension Cable
Step 5. At front light baffle, using #2 Phillips screwdriver, remove two 4-40 X 1/4" PPZ screws and two #4 lock
washers and remove baffle.
Step 6. Using #2 Phillips screwdriver, remove one 6-32 X 7/8" PPSS screw and one #6 lock washer securing tube
retainer and spacer to motor-bellows assembly and remove retainer and spacer.
Step 7. At bellows mounting plate, using #2 Phillips screwdriver, remove three 6-32 X 5/16" PPB screws, three #6
flat washers, and three #6 lock washers securing motor-bellows assembly to bulkheads. (Heat/light baffle
may come loose also.)
Step 8. At liquid lens, from outside of front ring, carefully push glass inward to disengage glass from ring pad, and
remove lens.
Step 9. Remove lens and bellows/motor assembly from luminaire.
Step 10. Replace lens and bellows/motor assembly by performing Steps 2–9 in reverse order.
Clamp
Motor-Bellows Assembly
Bellows
Mounting Plate
Bellows Motor Extension
Cable Assembly Connector
Motor Connector