Section 16: SUPPLEMENT INFORMATION ON INDEPENDENT FRONT SUSPENSION (IFS)
16-10
FIGURE 8: BELL CRANK AND IDLER ARM BALL JOINT
16043
5.
Install bearing, o-ring and nut.
Note :
Apply grease on bearing before in-
stallation.
5.
Firmly tighten nut (Fig. 9).
FIGURE 9: BELL CRANK
16044
FIGURE 10: BELL CRANK
16045
6.
Unscrew nut until bell crank or idler arm
start to turn by the application of 1 to 3
pound load (Fig. 10).
7.
Check for loose bearings by applying an
up and down load on bell crank or idler
lever (Fig. 9). The lever is not supposed to
move in the vertical axis direction.
