Cooking rack
Carrying
handle
Quick pressure release valve
Vent pipe
Air vent/cover lock
Detachable
power cord
Removable
cooking pot
Digital
display
Sealing ring
frame
Cover handle
Fill lines
Cooker
body
Carrying
handle
Locking
cover
Valve lever
Sealing ring
Fig. A
Cord receptacle
Green locking latch
Control knob
Start button
Cancel
button
Temperature sensor arm
Sensor hole
Grommet
Lift temperature
sensor arm
Sensor
hole
Fig. C
Fig. B
Turn locking latch
Fig. D
Fig. E
Grommet
Cover post
Vent filter
Sealing ring
frame
Sealing ring
Fig. F
3
BEFORE FIRST USE
As received, your pressure cooker will be fully assembled.
Before removing the cover, you will need to unlock the
green locking latch according to the instructions below.
Before use, remove all packaging material, including the
protective liner which is on the heating plate inside the
cooker body. Disassemble the cooker parts and clean them
as directed below. Become familiar with the various parts
(Fig. A) and read all instructions carefully.
COOKER PARTS
Remove the Cooker Cover
1. Before removing the cover, you will need to unlock the
green locking latch. Begin by positioning the cooker so
the digital display faces you. To unlock the latch, grasp
the sides of the latch and turn it towards you until it
stops (Fig. B). Lift the temperature sensor arm out of the
sensor hole in the cover (Fig. C).
2. Once you have released the temperature sensor arm
from the cover, rotate the cover counterclockwise until
the
INSTALL/REMOVE
vertical mark is within the
mark on the cooker body (Fig. D). Then lift the cover
straight up off the cooker body.
Disassemble Cooker Parts for Cleaning
It is recommended that the pressure cooker be thoroughly
washed before first use to remove any manufacturing
lubricants.
1. Lift the cooking rack and removable cooking pot out of
the cooker body. Remove all packaging.
2. Invert the cover and pull the sealing ring frame out
from the cover (Fig. E). Then remove the vent filter for
cleaning. To remove, place the inverted cover on the
counter, then rest a table knife on the rim of the cover and
insert the tip into one of the filter slots (Fig. F); lift the
filter up.
NOTE:
Although you will not need to remove
the filter after every use, you should periodically remove it
for cleaning.
3. Remove the sealing ring from the sealing ring frame. Wash
the sealing ring, sealing ring frame, vent filter, cooking
rack, and removable cooking pot in warm, soapy water.
Rinse and dry thoroughly.
4. Clean the cooker cover with a damp, soapy cloth.
Do NOT
immerse the cooker cover
in water.
CAUTION!
To prevent
electrical shock, never pour
water into the cooker body
or immerse it or the power
cord in water. Always be
sure the cooking pot is
COMPLETELY DRY before
placing it back in the cooker
body.
