background image

 

Safety and Installation Instructions 

 

When using your 

Prestige® Pro Series

 grill, please read and follow these basic precautions: 

 

GRILL INSTALLATION 

 

This gas grill must be installed in accordance with all local codes. 
 
If installation is planned in an area with no local codes, the gas grill must be installed in accord with the 
National Fuel Gas Code ANSI Z223.1 and storage and handling of liquefied petroleum gases, ANSI/NFPA 
58 or CSA B149.1 natural gas and propane installation code. 
 
 
 
 

CALIFORNIA PROPOSITION 65 WARNING 

 

The burning of gas cooking fuel generates some by-products which are on the list of 
substances which are known by the State of California to cause cancer or reproductive 
harm. California law requires businesses to warn customers of potential exposure to such 
substances. To minimize exposure to these substances, always operate the unit according 
to the use and care manual, ensuring you provide good ventilation when cooking with 
gas. 

 
 
 

GRILL LOCATION 

 

Do  not  use  or  locate  your  gas  grill  in  garages,  porches,  breezeways,  sheds,  enclosed  areas  or  under 
overhead unprotected combustible construction. 

 

Do not store or use your grill or gas tanks indoors; this gas grill is designed for outdoor use only. 

 

This gas grill cannot be used on or in recreational vehicles or boats. 

 

Clearances to combustible materials must be a minimum of 24" from the back and 24" on each side. 

 

The grill must be installed using only non-combustible materials. 

 

Do not obstruct the flow of combustion and ventilation air around the grill housing. Refer to minimum 

clearances stated above and keep free and clear of debris. 

Summary of Contents for GBQC36




















Reviews: