background image

 

15 

Maintenance Instructions 

 
As with all appliances, proper care and maintenance will keep your gas grill in good operating condition 
and prolong its life. By following these cleaning procedures on a regular and timely basis, your grill will 
be clean and working properly with minimum effort. 
 

Cleaning the Top Grates and Sear Grate: 

 

After cooking, turn the knobs to the OFF position and let the grill cool down before attempting to 
clean the grates. 

 

 

Before  first  use  and  at  least  once  a  week  when  using  the  grill,  it  is  suggested  that  you  wash  the 
grates in a mild soap and warm water solution. Use a brash or steel wool to clean the grates. Rinse 
with cold water. 

 

Cleaning the Sear Plates: 

 

When  using  the  grill,  at  least  once  a  week,  remove  the  sear  plates  and  clean  them  with  a  warm 
soapy water solution and a scrub brush. Rinse with cold water. 

 

Cleaning the Burner Tubes and Ports: 

 

It is important that the gas control knobs are in the OFF position and the fuel line is disconnected 
from the unit when cleaning the burners. 

 

 

To reduce the possibility of flashback, please use the following procedures at least once per week         
during heavy grill use to keep the burners clean and at least once per month during times of low 
usage to keep spiders and webs out of the system. 

 

                            1.    Remove the grates, briquettes and sear plates from the grill. 
                            2.    Carefully scrub the burners in place with a scrub brush and soapy water 
                            3.    Use a paper clip to clean out the port holes in the burners. 
                            4.    Be careful not to damage the igniter while performing this function. 
 

Cleaning the Grease Tray: 

 

The  grease  tray  should  be  removed,  emptied  and  then  washed  in  a  mild  soap  and  warm  water 
solution. Rinse with cold water. Do not put sand, aluminum foil or any other material in the grease 
tray at any time. 

 

Cleaning the Grill Surfaces: 

 

To  clean  the  exterior  of  the  grill,  use  a  stainless  steel  cleaner  and  wipe  down  thoroughly  with  a 
sponge or cloth. Never use aluminum foil anyplace in or on your grill. 

 

 

Wipe in the direction of the "grain" of the stainless steel with a non-abrasive cleaner. 

Summary of Contents for GBQC36




















Reviews: