17
Lighting Instructions
WHEN THE BURNERS WILL NOT LIGHT
PROBLEM WHAT TO DO
1. Air in the line Contact a qualified professional to correct.
2. Low gas pressure Check pressure and make sure a regulator is installed
correctly; check for proper pipe ID.
3. Burner orifice clogged Contact a qualified professional to correct.
4. Gas supply is OFF Turn ON the gas.
5. Gas line is blocked Contact a qualified professional to correct.
6. No spark. Check igniter gap per manual. Check the battery.
7. Shutter air mixture Adjust air shutters per manual.
8. Igniter broken Call Service and have igniter replaced.
9. Igniter dirty. Clean igniter of dirt or grease with cloth and water.
10. Light is not on. Connect 115 VAC power to rear of unit. Turn switch
on. Check bulb, replace if necessary per manual.
11. Burner not seated properly Seat burner properly per instructions in manual.
YELLOW OR ORANGE FLAME
PROBLEM WHAT TO DO
1. Obstruction in the gas line
Contact a qualified professional to correct.
2. Dust or dirt in burner holes. Clean burners per manual.
3. Improper installation of unit. Check installation per manual.
