background image

 

Pneumatic Oil Pump 3:1 

Operating Instructions 

 

Explanation of Safety Advice 

The safety advice provided in these operating instructions is categorised according to different 

danger levels. The different danger levels are identified within the instructions by the following 

symbols and identifying words: 

Symbol Indicates 

Result if the safety requirements are not observed or 
applied 

 

Danger 

Death or very serious injury 

 

Warning 

Possible death or serious injury 

 

Caution 

Possible slight or not serious injury or material damage 

Tab. 1-1: Safety Advice Classification according to Danger Type and Severity 

 

In addition, another symbol is used to indicate general tips about using the product.  

Symbol Indicates 

Meaning 

 

Note 

Background information or tips about how to use the product 

Tab. 1-2: General Information 

 

If the oil pump is incorrectly installed, or used for a purpose 
other than that originally intended for, it can result in personal 
injury or damage to equipment!  

 

 

Before starting to use the oil pump, read through these operating instructions carefully and 

completely. 

 

1.  General Information 

1.1 

Usage Stipulations 

• 

This oil pump can be used to deliver lubricating oil and similar neutral fluids.   

 

Danger! 

Never use it to deliver explosive fluids such as petrol, or other fluids with similar 

flashpoints! 

 

 

• 

To ensure that usage stipulations are met, read through the operating instructions completely 

before using the pump and observe all stipulations.  

 

Status 31.01.2008 

 

Summary of Contents for Pneumatic Oilpump 3:1





























Reviews: