35
7) LCD
Indicates transmission
PA
PA (Public Address) mode activated
AM
AM mode selected
FM
FM mode selected
UK
FM mode selected (only in
U
configuration
/ ENG
)
ROGER BEEP function activated
BP
KEY BEEP function activated
Automatic Squelch Control activated
VOX
VOX function activated
SCAN function activated (the dot blinks)
TALKBACK
TALKBACK function activated
MENU mode activated
Indicates selected channel (large digits)
Indicates selected band (digits on the top)
Indicates frequency or menu
8) VOX ~ VOX SET
VOX
(short press)
The
VOX
function allows
transmitting
by speaking into the original micro-
phone (or in the optional vox microphone) without pressing the
PTT
switch
(
17
). The use of an optional vox microphone connected to the rear panel
of the transceiver (
E
)
disables
the original microphone.
Press shortly
VOX
key (
8
) in order to
activate
the
VOX
function.
“VOX”
appears on the display. Press shortly again the
VOX
key (
8
) to
disable
the
function.
“VOX”
disappears.
VOX SET
(long press)
Press the
VOX
key (
8
) for 2 seconds in order to
activate
the
VOX Adjustment
mode
.
Three adjustments are possible: Sensitivity
SET L
/ Anti-vox level
SET A
/ Vox
delay time
SET T
(over and over).
1.
To
change
a setting other than the one displayed, press the
VOX
key (
8
)
to select the next setting or...
2.
Turn the rotary
PUSH
knob (
6
) or press the
UP
/
DN
(
18
) keys on the microphone
to
modify
the setting.
3.
Press again the
VOX
key (
8
) to
store
and
move
to next setting...
4.
Once the settings done, press the
PTT
switch (
17
) key to
exit
the
VOX Adjust-
ment
mode. If no adjustment is made for 5 seconds, the unit automatically
exits the function.
-
Sensitivity
SET L
: allows the adjustment of the microphone (original one or
optional vox) for an optimum transmission quality. Adjustable level from
1
(high level) to
9
(low level).Default value:
5
.
-
Anti-Vox
A
: allows disabling the transmission generated by the surrounding
noise. The level is adjustable.
OF
(according the squelch level) and from
0
(without anti-vox) to
9
(low level). Default value:
9
.
-
Delay
time
SET T
: allows avoiding the sudden cut of the transmission by
adding a delay at the end of speaking. The level is adjustable from 1 (short
delay) to 9 (long delay). Default value;
1
.
The
VOX adjustment
does not automatically activate the
VOX
function.
9) F - FREQUENCY BAND SELECTION
See §
FUNCTION TURNING ON THE UNIT
page 37.
10) NB/ANL - HIC FILTERS
3 positions switch:
Low position:
no filter is activated.
Central position:
only
ANL
and
NB
filters are enabled.
High position:
all filters (
ANL
,
NB
and
HI-CUT
)
are activated.
NB:
Noise Blanker /
ANL:
Automatic Noise Limiter. These filters allow reducing
back ground noises and some reception interferences.
HI-CUT:
Cuts out the high frequency interferences and has to be used in
accordance with the reception conditions.
Note:
ANL
filter works only in AM mode
11) PRIORITY CHANNELS
Priority channels will be automatically
selected
by switching this key (
11
).
3 positions switch:
EMG1
/ Priority channel 1 is activated.
EMG2
/ Priority
English
