37
A) DC-POWER TERMINAL (13,2 V)
B) ANTENNA CONNECTOR (SO-239)
C) JACK FOR EXTERNAL OPTIONAL SPEAKER (8
Ω
, Ø 3.5 mm)
D) JACK FOR PA OPTIONAL SPEAKER (Public Address) (8
Ω
,
Ø 3.5 mm)
E) JACK FOR OPTIONAL VOX MICROPHONE (8
Ω
,Ø 2.5 mm)
C) FUNCTION TURNING ON THE UNIT
To
select
the
FREQUENCY BAND
turn
off
the unit. Press and hold the
F
key
(
9
) and then turn the unit
on
.
(Configuration: EU; PL; d; EC; U; In)
The frequency bands have to be chosen according to the country of use.
Don’t use any other configuration. Some countries need a user’s licence.
See table page 62
.
1.
Turn on the power while pressing the
F
key (
9
). The letter corresponding to
the current configuration is blinking.
2.
In order to change the configuration, use the
PUSH
rotary knob (
6
) on the
unit or the
UP
/
DN
buttons (
18
) on the microphone.
3.
When the configuration is selected, press the
F
key (
9
) during 1 second. The
letter corresponding to the configuration is continuously displayed and a
confirmation beep sounds.
4.
At this point, confirm the selection by switching off the transceiver and then
switching it on again.
See the frequency bands table at pages 57 to 59 / configuration table
page 61.
D) MENU
The order of 11 functions is as described in this manual. However, the func-
tion displayed by entering the
MENU
will be the last function modified by
user.
The procedure is the same Whatever the function is:
Press
PUSH
knob (
6
) for 3 seconds to
enter
MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the menu.
2.
Press
PUSH
knob (
6
) to
validate.
The
parameter
of the chosen function blinks
on the display.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
modify
the value of the parameter.
4.
New press
PUSH
knob (
6
) to
validate
the chosen value. The parameter
stops blinking and if the function has more than one parameter, the next
parameter blinks.
5.
If no key is pressed, the unit exits
MENU
after 10 seconds. disappears from
the display.
Note:
UP
/
DN
buttons (
18
) on the microphone have the same effect as the
rotation of the rotary
PUSH
knob (
6
).
PTT
switch (
17
)
validates
the last setting
and
exists
MENU
. disappears.
1) COLOR
This function allows to
choose
the backlight color of the LCD.
Press
PUSH
knob (
6
) for 3 seconds to
enter
MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the
COLOR
function.
2.
Press
PUSH
knob (
6
) to
validate.
The current
COLOR
blinks on LCD.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
11
) on the microphone
to
select
the color. 7 available colors over and over :
4.
New press
PUSH
knob (
6
) to
validate
the chosen color. The parameter stops
blinking.
a)
Go to point
1
to
adjust
another function or
b)
Press the
PTT
switch
(
17
) to
validate
and
exit
MENU
. disappears in the display.
5.
If no key is pressed, the unit
exits
MENU
after 10 seconds, disappears in
the display.
Default
COLOR
is (red)
.
2) KEY BEEP
When the function is activated, a beep
sounds
when a key is pressed, by
changing the channel etc.
“BP”
appears on the display when the function
is active.
Press
PUSH
knob (
6
) for 3 seconds to
enter
MENU
. is displayed.
1.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
select
the
KEyBEEP
function.
2.
Press
PUSH
knob (
6
) to
validate.
The current status blinks on LCD.
3.
Turn the rotary
PUSH
knob (
6
) or use
UP
/
DN
buttons (
18
) on the microphone
to
activate
On
/
deactivate
Of
the function.
4.
New press
PUSH
knob (
6
) to
validate
. The parameter stops blinking.
a)
Go to
point
1
to
adjust
another function or
b)
Press the
PTT
switch (
17
) to
validate
and
exit
MENU
. disappears.
5.
If no key is pressed, the unit
exits
MENU
after 10 seconds, disappears in
the display.
Default
KEY BEEP
is
On
.
English
