44
squelch level) and from
0
(without anti-vox) to
9
(low level). Default
value:
OFF
.
-
Delay
time
SET-T
: allows avoiding the sudden cut of the transmission
by adding a delay at the end of speaking. The level is adjustable
from
1
(short delay) to
9
(long delay). Default value:
5
.
The
VOX SETTING
automatically activates the
VOX
function.
“VOX”
appears in the display.
Note:
The unit will automatically
exit
VOX SETTING
without saving
the setting parameters
if no key is pressed after 10 seconds or, if
any key is pressed.
7) SCAN ~ DW ~ M1
SCAN
(short press)
Press the
SCAN
key (
7
) to
activate
the
SCAN
function in ascending
order.
“SCAN”
is displayed. The scanning stops as a channel is
active. The scanning automatically starts 3 seconds after the end
of the transmission and no key is activated. In
SCANNING
mode,
turn the rotary
CH
knob (
5
) or use the
UP
/
DN
buttons (
13
) on the
microphone to change scan direction.
During the scan, long press the •
key (
9
) for one second to
alternate
between channel scan and memory scan modes. In the
MEMORY
SCAN
mode, only the emergency channels
(see §
EMERGENCY
CHANNELS
on page 44)
and the memorized channels
(see §
MEMORY
page 45)
are scanned.
Press the
PTT
switch (
12
) or the
SCAN
key (
7
) to
exit
the
SCAN
function.
DW
(long press)
A long press (1s) on the
DW
key (
7
)
activates
the
DW
(Dual Watch)
function.
“DW”
is displayed. This function lets you watch over
emergency and the current channels.
-
The first long press activates the
DW
function between emergency
channel 1 and the current channel.
-
A second long press activates the function between the emergency
channel 2 and the current channel.
See §
EMERGENCY CHANNEL
1
and
2
page 49.
The current channel number and the emergency channel are
displayed alternately. The
“EMG”
icon also appears along with
the emergency channel. The selected channel can be changed
during dual watch.
- A new long press of the
DW
key (
7
)
deactivates
the
DW
function.
“DW”
disappears from the display.
M1
See §
MEMORY
page 45
.
8) ANB/ANL ~ HI-CUT ~ EMERGENCY CHANNELS ~ M2
ANB/NL
(short press)
ANL/NB
(Automatic Noise Limiter / Noise Blanker): These filters
reduce
background noise and some noise on reception.
Press the
ANL/NB
key (
8
) to
alternate
between the following 4
states in a loop:
1.
ANL/on - NB/off •
2.
ANL/off - NB/on •
3.
ANL/
on - NB/on •
4.
ANL/off - NB/off.
The filter icon appears in the display when the filter is active (
on
).
HI-CUT
(long press)
Hi-Cut
cuts out the high frequency interferences.
Press the
HI-CUT
key (
8
) for one second to
activate
/
deactivate
the
HI-CUT
filter.
«HI-CUT»
appears in the display when the filter is
active.
EMERGENCY CHANNELS
(9 + 8 short press)
- Briefly press the • key (
9
) then the •
EMG
(
8
) key to combine these
two keys.
- A first combination
activates
emergency channel 1.
- A second combination
activates
emergency channel 2.
- When an emergency channel is active,
«EMG»
is displayed.
- A third combination allows to
return
to the initial channel.
«EMG»
disappears from the display.
See §
EMERGENCY CHANNEL 1
and
2
pages 49
.
M2
See §
MEMORY
page 45
English
