PremiumLift AirCare Max-Pro ACMaxPP, User Manual, Page: 6 / 27

6 www.premiumlift.com.au
BEFORE USING THIS SYSTEM FOR THE FIRST TIME:
-
Read through this instruction manual conscientiously from start to finish.
-
Note the safety instructions which must be observed.
PremiumLift products are ISO Certified and TGA Registered and meet all safety and
functionality requirements.
These safety requirements can only be met if the user is satisfied with the proper condition of
the product (including accessories) before use.
GENERAL INFORMATION
AirCare Max-Pro is a digital pump designed to provide controlled compressed air to a
pressure care mattress. The inflated cells within the supplied mattress
provide an
alternating pressure surface designed to reduce surface pressure on the skin and therefore
reduce risk of the development of pressure ulcers in susceptable patients.
This pump has audible and visual alarms for low pressure, power failure and cycle fault, static
mode and a lock out facility. Extra features include maxi firm mode and four
choices of cycle
time - 6, 9, 12 and 25 minutes.
Harvest Healthcare supply a pump and mattress but it is the user’s responsibility to ensure
each system meets the guidelines set out in the pump and mattress guide (shown below).
Failure to do this could put the service user at risk. This could prolong the recovery process or
increase the risk of further tissue damage.
For information on our mattress range please refer to the mattress user manuals available on
our website www.premiumlift.com.au
GENERAL
INFORMATION