6. When the ready indicator (blue) is illuminated, you should turn the knob to the “
”
position again, there will be hot water flowing out. When the ready indicator (blue) is
extinguished, close the pump by turning knob again to the “
” position. The
pre-heating is finished.
HOW TO MAKE ESPRESSO
COFFEE
1. Remove the funnel by turning it clockwise. Add ground coffee to the steel mesh with a
coffee spoon. A spoon of ground coffee power can make about a cup of top-grade
coffee. Then press the ground coffee powder tightly with the coffee spoon.
2. Set the steel mesh into the metal funnel, make sure the tube on the funnel aligns with
the groove in the appliance, then insert the funnel into the appliance as shown on the
“INSERT” mark, and fix them into the coffee maker firmly, turning it anticlockwise until
it is at the “LOCK” position.
3. Pour water in the water tank. Then place a cup (your cup) on the drip plate.
4. At that time, after preheating, the ready indicator (blue) is illuminated. Once the blue
lamp is illuminated, turn the knob to the “
” position, wait for a moment, and coffee will
flow.
Note
: During continuous operations, the ready indicator is likely to extinguish due to the
inadequate temperature of the water in the boiler, but it does not mean the unit will stop
operating, you may continue to make coffee regardless of it.
5. Turn the knob to the “ ” position manually when the desired coffee (about 60ml or two
cups) is obtained or the colour of coffee is too light. Your coffee is ready now.
WARNING
: Do not leave the coffee maker unattended during making the coffee, as you
need operate manually sometimes!
6. After finishing making the coffee, you can take the metal funnel out turning it clockwise
and pour the coffee residue out with the steel mesh pressed by the press bar.
7. Press the power switch to cut off the power.
8. Let the appliance cool down completely, then rinse the steel mesh and metal funnel under
running water.
